puls — PULS Marine Propulsion Engines Manual (EN)

Chapter 3 N40469 Digital control panel overview The digital control panel shown in figure 3 is used with the keyswitch panel. The switches are protected from the entry of water, but if the control panel is in an exposed location, it should be protected by a cover when not in use. Below is a description of the instrument and switches on the digital panel. 1. Display - this screen shows the following information. -- Engine speed -- Percent load -- Inlet manifold air temperature -- Engine hours -- Battery voltage -- Fuel rate -- Engine totals - current & trip -- Transmission oil pressure -- Oil pressure -- Boost pressure -- Coolant temperature -- Engine Diagnostic & Events 2.

Screen illumination - varying degrees of Figure 3 brightness. 3. Alarm mute - turns off the siren. 4. Scroll forward button - moves forward through the screen options. 5. Scroll back button - moves backwards through the screen options. Caution: If the audible warning device operates, the panel will indicate the engine affected. Reduce the speed of the engine affected to idle and, if necessary, stop the engine. Page 12