Chapter 3 N40469 How to stop the engine 1. Adjust the engine speed control to the minimum speed position. Ensure that the control lever for the reverse gearbox is in the neutral position. If the engine has operated at high load for a long period of time, allow the engine to cool for one to two minutes. 2. Hold the stop switch in until the engine stops. Release the stop switch. Adjustment of the engine speed range The idle or maximum speed settings cannot be changed by the engine operator, because this can damage the engine or the transmission and is set at the factory. Figure 7 Caution: Any speed adjustments must be carried out by an authorised dealer.
Operational angles These engines are intended to be mounted so that the cylinders are vertical, when viewed from ahead or astern. The operational angles that are permissible in service are 20 O nose up, heel 25 O constant and 35 O intermittent. Nose down capability Details are not available at time of print. Page 16