puls — Puls 1106 Series Marine Propulsion Engines User's Handbook

Chapter 5 N40469 How to check the condition of the vibration damper Caution: A vibration damper (figure 27 items 1) should be renewed if there is impact damage to the outer casing or if there is leakage of the viscous fluid from the cover plate. Check the area around the holes for the damper bolts for cracks and general wear if the damper has become loose in service. Check that the six bolts (figure 27 item 2) for the viscous damper are tightened correctly: Tighten the six M12 bolts to 115 Nm (85 lb ft). Figure 26 If it is necessary to renew the vibration damper refer to the workshop manual. Figure 27 Page 42