DRIVING - Transmission How to Shift using Double Clutch Method 5. Release the pedal to engage the clutch. brake pedal and firmly press on the acceler- ator pedal. Whether you are upshifting or down shifting, it is best to double clutch. Double clutching is easier on the transmission and on the engine, helping your vehicle match engine speed with driveline speed and achieving clash-free shifts. Automatic and Automated Transmissions WARNING! An automatic or automated transmission makes shifting much easier. It remains important to completely understand how to operate the transmission to optimize its efficiency.
Please read the manual for your automatic or automated transmission included with your vehicle. Do not leave the cab of your vehicle without applying the parking brake. The truck could roll and cause an accident resulting in death or personal injury. Always apply the parking brake before you leave the cab. To double clutch: 1. Push the clutch pedal down to disengage the clutch. 2. Move the gear shift lever to neutral. 3. Release the pedal to engage the clutch. This lets you control the rpm of the mainshaft gears, allowing you to match the rpm of the mainshaft gears to those of the output shaft. 4 Hill Hold For automated transmissions, there is no "park" position.
So you will need to apply the parking brake before leaving the cab. WARNING! The hill hold feature is available as an option with certain automated transmissions. This feature holds the vehicle while on a hill to allow the operator to release the service brakes and press the accelerator. This feature will hold the vehicle if the vehicle is attempting to go up a hill from a stop in either drive or reverse. a. a. Upshifts: let the engine and gears slow down to the rpm required for the next gear. b. b. Downshifts: press accelerator, increase engine and gear speed to the rpm required in the lower gear. 4.
Now quickly press the pedal to disengage the clutch and move the gear shift lever to the next gear speed position. If your vehicle has an automated transmis- sion, be aware that it can roll backwards when stopped on a hill or grade, or when starting from a stop on a hill or grade. Fail- ure to comply may result in death, personal injury, equipment or property damage. Ob- serve the following guidelines: (1) When stopped on a hill or grade, press the brake pedal. (2) When starting from a stop on a hill or grade, quickly remove your foot from the Y53-6096-1A1 (01/17) 105