MAINTENANCE - Maintenance Schedule 5 Y53-6096-1A1 (01/17) 139 System Component Task I A B C D E Rear Suspension U-bolts Check the torque. Tighten to specified torque value as • • Frame and Crossmembers Bolts Check the torque. Tighten to specified torque value as • Mounting Brackets and Fasteners Check the condition and the fastener torque. Tighten to the specified torque value as required; see Suspension U-Bolts, Grade 8 on page 213. • • Drum Brakes (All) Slack Adjusters Check the push rod travel and check the control arm for cracks. Adjust at reline; see Auto Slack Adjuster on page 162. • Lubricate (NLGI #2 grease).
• Brake Camshaft Bearing Check for excessive camshaft play in the axial and radial directions. Max allowable play is 0.003 in. Lubricate (NLGI #2 grease). • Brake Treadle Valve Clean the area around the treadle, boot, and mounting plate. Check the pivot and mounting plate for integrity. Check the plunger boot for cracks. Lubricate roller pin, pivot pin, and plunger (NLGI #2 grease). • Brake Air System Check air lines and fittings for leaks; see How to Check for Air System Leaks on page 159. Adjust routing as required to prevent chafing. Check tank mounting and condition. • Clean or replace the inline filters. • Brake Lining Inspect: replace as required. •