MAINTENANCE - Maintenance Schedule 5 142 Y53-6096-1A1 (01/17) System Component Task I A B C D E Main and Auxiliary Transmission Main and Auxiliary Transmission and Transfer Case Inspect for visible damage, signs of overheating, and leaks. • • Check the drain plugs for tightness. • Mounting Brackets and Fasteners Check the condition of the fasteners and their torque. Tighten to the specified torque value as required. • Oil Cooler Clean the fins (air-to-oil type) and body. Check the hose condition and for leaks: replace as required. • Main and Auxiliary Transmission Check the oil level: refill as required. • Main and Auxiliary Transmission (ON HIGHWAY) Drain lubricant while warm.
Flush each unit with clean flushing oil. 500,000 miles/ 800,000 km Main and Auxiliary Transmission (OFF HIGHWAY) Drain lubricant while warm. Flush each unit with clean flushing oil. • • Auxiliary Transmission Cotta Transfer Case TR2205 Fabco Transfer Case TC142/TC143/TC170/ TC270 Marmon-Harrington Transfer Case MVG2000/MVG2000SD Inspect: Check oil level, inspect for leaks and any visible damage. • Initial oil change: Drain oil while warm: flush case with gear oil-compatible fluid, clean magnetic drain plug, and refill. Do not flush the case with any solvent. • • Change oil.
• Air Intake Air Intake Piping, Mounting, and Charge Air Cooler Check the system for broken pipes, leaks, joint integrity, cleanliness, and proper support; see Air Intake System on page 190. • Air Cleaner Replace the engine intake air cleaner element. When required by air restriction indicator or required by the engine manufacturer's operator manual.