PACCAR 520 — Maintenance Schedule

MAINTENANCE - Maintenance Schedule 5 Y53-6096-1A1 (01/17) 143 System Component Task I A B C D E Clutch Clutch Hydraulic Fluid Replace fluid and bleed system. 240,000 miles/384,000 km or 2 years, whichever occurs first. Clutch Release Bearing Lubricate. • Inspect and adjust when necessary (no adjustment required for SOLO type clutches) • Cooling Hoses Check the radiator and heater hoses for leaks. • • Extended Life Coolant (ELC) Check the freeze point; see Cooling System Maintenance on page 168. • Check for contamination using test strips; see Cooling System Maintenance on page 168. • Replace blank water filter if applicable. • Perform lab analysis.

If lab analysis shows coolant is unsuitable for continued use: Flush, drain, and refill. Add ELC Extender; see Cooling System Maintenance on page 168. • Flush, drain, and refill with new coolant; see Cooling System Maintenance on page 168. • Fan Clutch Check for air leaks. See Engine Fan on page 189. Check the fan drive bearings (turn the sheave in both directions to check for worn hub bearings). • • Solenoid Valve Check the fan drive for proper engagement and disengagement. • •