MAINTENANCE - Cooling System Maintenance before applying the car wash and wax solution. Corrosive materials used for ice and snow removal and dust control can collect on the underbody. If these materials are not removed, accelerated corrosion (rust) can occur on underbody parts such as fuel lines, frames, floor pan, and exhaust system, even though they have been provided with corrosion protection. To clean the screen, dampen a clean, soft, lint-free cloth with water only. A mild glass cleaner that does not contain alcohol or ammonia may also be used. Cleaners that contain alcohol and/or ammonia will eventually dry-out, crack and "yellow" the screen. Wipe the screen gently back and forth.
You can also use a commercial cleaner especially designed for LCD screens. Do not wash the vehicle in direct sunshine. Do not spray water directly into the cab vents. 2. Using soapy water, wash the vehicle with a clean soft cloth or a soft brush made for automotive cleaning. At least every spring, flush these materials from the under body with plain water. Be sure to clean any area where mud and other debris can collect. Sediment packed in closed areas of the frame should be loosened before being flushed. If desired, your dealer can do this service for you. 5. Wipe everything dry with a chamois to avoid water spots.
To prevent water spotting, dry off the cosmetic surfaces with a clean cloth or chamois. 6. Remove road tar with an automotive type tar remover or mineral spirits. 7. After cleaning and drying, apply a quality automotive wax. 5 Use cool or warm water and a mild, household type soap. Strong industrial detergents and cleaning agents are not recommended. Do not use stiff brushes, paper towels, steel wool, or abrasive cleaning compounds because they will scratch painted, plated, and polished metal surfaces. 3. Rinse surfaces frequently while washing to flush away dirt that might scratch the finishes during the washing operation. 4. Hose dirt and grime from the entire chassis.
Cooling System Maintenance Information about concentration and condition of coolant, including filter. Your engine’s cooling system is standard with Nitrited forumulated Extended Life Coolant (ELC) that meets or exceeds ASTM D 6210 requirements. Nitrite-Free Extended Life Antifreeze/Coolant can be used if it meets ASTM D6210 and Cummins CES 14439. ELC consists of a mixture of ethylene glycol, water, and nitrited organic acid technology (NOAT) corrosion inhibitors. ELC prevents corrosion and scale formation as well as Care of Display Screens on the Dashboard If an oil leak develops, you will be able to detect it easier. From time to time it may be necessary to clean the display screen.
168 Y53-6096-1A1 (01/17)