PACCAR 520 — Suspension U-Bolts, Grade 8

MAINTENANCE - Specification Reference Charts Suspension U-Bolts, Grade 8 Torque specifications for suspension u- bolts. Tighten all U-Bolts with a torque wrench. Torque specifications apply to the following fasteners with lightly lubricated threads. Chevron Zinc Lubricant or SAE 20/30 oil should be used on U-Bolt threads. Torque requirements apply to manufacturer proprietary suspensions. All other suspensions must refer and adhere to original manufacturers shop manual. The values shown here are for suspension u-bolts and should not be applied to bolts and fasteners for the frame.

5 Standard and Metric Fastener Torque for Grade 8 U-Bolts See Also Front Axle and Suspension on page 194 Rear Axle and Suspension on page 201 Wheels on page 210 Y53-6096-1A1 (01/17) 213 U-Bolt Size Diameter (inches) Torque (N•m) Torque ( lb-ft) 1 1/4 1,890-2,120 1,390-1,560 1 1/2 3,130-3,860 2,300-2,840 M20 475 +/- 27 350 +/- 20 U-Bolt Size Diameter (inches) Torque (N•m) Torque ( lb-ft) 3/4 333-408 245-300 7/8 598-734 440-540 1 925-1,060 680-780 1 1/8 1,470-1,660 1,080-1,220