MAINTENANCE - Specification Reference Charts Frame Fastener Torque Requirements Torque specifications for standard and metric frame fasteners, including the fifth wheel. Use ESNA Style Lock Nut, with nylon insert. Lubricate nylon insert nut lightly with SAE 20/30 oil. Tighten all frame fasteners with a torque wrench. Torque specifications apply to the following fasteners with lightly lubricated threads. These values are applicable to fasteners on the frame and do not apply to u-bolts for the suspension.
5 See Also Front Axle and Suspension on page 194 Rear Axle and Suspension on page 201 Wheels on page 210 214 Y53-6096-1A1 (01/17) Fastener Size Tightening Specification lb-ft (N•m) 1 700-830 (952-1,129) 1-1/8 990-1,170 (1,346- 1,591) 1-1/4 1,380-1,630 (1,877- 2,217) Metric Fastener Size (with nylon insert nuts) Tightening Specification lb-ft (N•m) M5 6-9 (8-12) M6 7-11 (9-15) M8 17-23 (23-31) M10 24-32 (33-43) M12 55-75 (75-101) M16 120-160 (163-217) M20 260-340 (352-460) M20 (All Metal Lock Nuts) 315-350 (427-475) Fastener Size Tightening Specification lb-ft (N•m) 5/16 16-22 (22-30) 3/8 30-40 (41-54) 7/16 55-65 (75-88) 1/2 80-90 (109-122) 9/16 115-140 (156-190) 5/8 165-195 (224-265) 3/4 290-340 (394-462) 7/8 380-460 (517-626)