PACCAR 520 — Manually Release the Parking Brake

EMERGENCY - How to Recover a Vehicle WARNING! Do not disassemble a spring brake cham- ber. These chambers contain a powerful spring that is compressed. Sudden release of this spring may result in death or personal injury. 2 4. Insert the release stud through the opening in the spring chamber where the cap was removed. Insert it into the pressure plate. Turn the release stud 1/4 turn clockwise in the pressure plate. This secures the cross pin into the cross pin area of the pressure plate and locks it into the manual release position. WARNING! Releasing the spring brakes on an unse- cured vehicle could lead to an accident.

The vehicle could roll, which may result in death, personal injury, equipment or property dam- age. Always secure the vehicle with wheel chocks, chains, or other safe means to pre- vent rolling before manually releasing the spring brakes. 2. Remove the release stud assembly from the side pocket, and remove the release nut and washer from the release stud. To move a vehicle immobilized by the spring brakes due to loss of air pressure in the brake system, perform the following procedure: 1. Remove the cap from the spring chamber 5. Assemble the release stud washer and nut on the release stud. 3. Slide out the release stud. Y53-6096-1A1 (01/17) 39