EMERGENCY - How to Recover a Vehicle the Best Practices for Recovery Rigging? on page 45. 5. Make sure the recovered vehicle's parking brakes are released. See Manually Release the Parking Brake on page 38. 6. If you desire to use the recovered vehicle’s brakes, ensure that the vehicle’s air system is connected to that of the recovery vehicle. Ensure that any air line that has been removed from a driver-controlled main differential lock is firmly capped to prevent loss of air pressure from the recovery vehicle if it is supplying air pressure.
If you don’t desire to use the recovered vehicle’s brakes, ensure that you cage the spring brakes before attempting to move the vehicle, see How to Manually Lock a Differential on page 42. 7. Follow state/provincial and local laws that apply to vehicles in tow. 8. Do not tow vehicles at speeds in excess of 55 mph (90 km/h). Recommended Practice #602–A — “Front Towing Devices For Trucks and Tractors.” Recommended Practice #602–B — “Recovery Attachment Points For Trucks, Tractors, and Combination Vehicles Recommended Practice #626 — “Heavy Duty Truck Towing Procedures.” WARNING! 2 Do not drive vehicle with malfunctioning brakes.
If one of the brake circuits should become inoperative, braking distances will increase substantially and handling charac- teristics while braking will be affected. You could lose control of your vehicle or cause an accident. Have it towed to the nearest dealer or qualified repair facility for repair. Failure to comply may result in death, per- sonal injury, equipment or property damage. Copies of these can be obtained from the following address: Technology & Maintenance Council 950 N. Glebe Road (703) 838-1763 Arlington, VA 22203 Email: tmc@trucking.org Website: http:// tmc.truckline.com WARNING! Do not operate a vehicle when the spring brakes have been manually released.
Driv- ing a vehicle after its spring brakes are man- ually released is extremely dangerous. The brakes may not function. Failure to comply may result in death, personal injury, equip- ment or property damage. Manually Release the Parking Brake Recovering a vehicle may require the parking brakes to be released. There may be times when there is not enough air pressure, or the engine's air compressor is not able to produce enough pressure, to release the parking brakes. In such cases, the parking brakes (or Spring Brakes) can be manually released. For additional information concerning heavy duty truck recovery, refer to the following Technology & Maintenance Council (TMC) literature.
38 Y53-6096-1A1 (01/17)