EMERGENCY - How to Recover a Vehicle If you don’t desire to use the recovered vehicle’s brakes, ensure that you cage the spring brakes before attempting to move the vehicle. CAUTION A recovered vehicle will have no operational brake system. Additionally, the rear axle spring brakes will probably be applied. 2 1. Remove the air line and firmly cap the air line from the vehicle. (2) 2. Remove the caging bolt from its storage hole. (1) 3. Screw the caging bolt into the air line hole. (2) When fully engaged, a 0.25 - 0.5 in. (6.35-12.7 mm) space will remain between the air cylinder and the bolt head. This action will lock the differential by pushing a piston into a “lock” position. 1.
Caging bolt storage location 2. Location of air line to differential lock actuator If you desire to use the recovered vehicle’s brakes, ensure that the vehicles air system is connected to that of the recovery vehicle. Also ensure that any air line that has been removed from a driver- controlled main differential lock is firmly capped to prevent loss of air pressure from the recovery vehicle. Y53-6096-1A1 (01/17) 43