CONTROLS - Guide to the Warning Symbols axle and type of lubricant. Very high temperatures signal a need to have your axle(s) lubrication checked. Illuminates during normal operating conditions to indicate a problem with the ABS System. Illuminates when a problem exists with Automatic Traction Control (ATC). NOTE For more information about the stability con- trol system installed on your vehicle, please refer to additional material supplied with this operator manual, included in your glove box informational packet. CAUTION 3 Driving with very hot temperatures in your rear drive axles can cause serious damage to axle bearings and seals.
Have your axle lubrication checked if you notice a sign of overheating. See Also Automatic Traction Control on page 107 Axle, Front Driven Brake, Park Brake This icon will appear when the front driven axle is engaged. Depending on the vehicle configuration, there may be a single gauge for more than just the forward and rear driver. The icon will have a label FWD or REAR to represent which axle the temperature is causing the warning light. Axle, Oil Temperature (Forward or Rear) Illuminates in the status indicator when parking brakes are applied. Brakes, Anti-Lock Brake System This warning icon is to alert the operator of elevated axle lubricant temperature.
Brakes, Trailer Anti-Lock Brake System These temperatures will vary with the kind of load you are carrying and the driving conditions you encounter. Maximum axle temperature may vary, depending upon the Illuminates during the Instrumentation System Self Test. Have the ABS system checked by an authorized dealer if the ABS Warning Lamp stays on for more than 3 seconds. Illuminates during the Instrumentation System Self Test and the tractor/truck is connected with a ABS equipped trailer. Y53-6096-1A1 (01/17) 59