PACCAR 520 — Operate the Windshield Wipers

CONTROLS - How to Flash Marker and Clearance Lights overriding this functionality is attainable via the Settings Menu in the instrument cluster display. Go to Settings - > Wiper Interlock and turn this value to OFF. NOTE Operate the Windshield Wipers The “flash to pass” functionality of the head- light switch is not available for vehicles man- ufactured with High Intensity Discharge (HID) headlamps. Please check with local regulations regarding restrictions on using high beam flashing. 3 This vehicle is equipped with a two speed, intermittent windshield wiper system.

The windshield wiper system is integrated with the exterior lights so that the low beam headlights will turn on when the windshield wipers turn on. Avoid running the wiper blades over a dry windshield to prevent scratching the glass. Spray on washer fluid first. A scratched windshield will reduce visibility. A seven-position rotary wiper switch (located on the turn signal lever) operates the windshield wipers and washer. If you need to use the windshield wipers: NOTE Continued pressing of the high beam flash will not keep the high beams on. WARNING! 1. Rotate the end of the turn signal lever to change the wiper mode from off to on. 2.

Continue to rotate the outer knob of the turn stalk lever to adjust the wiper speed. How to Flash Marker and Clearance Lights Clean blades regularly with a damp cloth to remove road film and wax buildup. Do not drive with worn or dirty wiper blades. They can reduce visibility, making driving hazard- ous which may lead to an injury accident re- sulting in death or personal injury. A button on the turn stalk will momentarily flash the marker and clearance lights when pushed. CAUTION 1. Push the small button on the end of the turn stalk Do not use antifreeze or engine coolant in the windshield washer reservoir, damage to seals and other components will result.

4 levels of intermittent speeds Low wiper speed High wiper speed To override this function, turn the headlights on and then off again and the low beams will turn off. Permanently 76 Y53-6096-1A1 (01/17)