PACCAR 520 — How to Start Vehicle in Normal Weather

DRIVING - Starting and Operating Starting and Operating NOTE Some starters are equipped with overcrank protection. Check the Engine Operation and Maintenance Manual for details. Since each vehicle is custom-equipped, all engine operation instructions in this manual are general. You will want to consult the manual for your engine to find out details about your specific engine’s needs. You may need to use a slightly different procedure from the one outlined here. 1. Press and hold ENGINE START when using the right hand drive position to start the engine. 2. Press ENGINE STOP when using the right hand drive position to stop the engine.

When the outside temperature is above 50°F (10°C), you can use the following procedure: 4 Starting and Warming Up 1. Set the parking brake. 2. Put your main transmission in Neutral. 3. Disengage (depress) the clutch (with manual transmission). 4. Turn the key switch to ON. How to Use Engine Start Switch on Right Hand Drive How to Start Vehicle in Normal Weather a. If the center display prompts for a Anti-Theft passcode, use the Menu Control Switch to enter the four digit code. 5. Turn the ignition key to the START position. If the engine does not start within 30 seconds, release the ignition switch.

To avoid overtaxing the starter motor or the batteries, don’t use the starter for more than 30 seconds. Let the starter motor cool and the batteries recover for two minutes before trying again. If Right hand drive station has an Engine Start/Stop switch to enable engine operation from the curb side position. CAUTION Never operate the starter motor while the engine is running. The starter and flywheel gears could clash or jam, severely damag- ing them. The Engine Start/Stop switch will only work when the ignition switch on the left hand side cockpit is in the ON position and the RH Steer switch is in the engaged position. 96 Y53-6096-1A1 (01/17)