MAN — Engine Systems

DD Platform EuroV Operators Manual The purpose of the Exhaust Gas Recirculation System (EGR) is to reduce engine exhaust gas emissions. The EGR system has been optimized to dramatically cut NOx formation by routing a measured amount of exhaust flow to the cylinders to lower combustion temperatures. Lower temperatures result in lower NOx levels without the negative effects of retarding engine timing. The EGR valve has been moved to the top of the engine for improved serviceability. On the 260 - 350 horsepower engines, the EGR is fed by all six cylinders.

The low horsepower engines use an asymmetric turbocharger with two entries, and the EGR is fed from the first three cylinders, taken from a small entry. The exhaust with a maximum exhaust gas temperature of 730°C (1346°F) is cooled to a maximum of 150°C (302°F) in the EGR cooler. The cooled exhaust gases then pass through the EGR valve and added to the mixer housing. The addition of cooled exhaust gases back into the combustion airflow reduces the peak cylinder combustion temperature. Less oxides of nitrogen (NOx) are produced at lower combustion temperatures. All information subject to change without notice. 59 DDC-SVC-MAN-0209 Copyright © 2019 DETROIT DIESEL CORPORATION