Routine Preventive Maintenance Replacement of Belts DD Platform engines utilize a specially designed EPDM belt material which is exclusive to the OE component. Replacement with an aftermarket part may lead to shortened maintenance intervals and excessive noise. If the vehicle is operated in severely cold/hot temperatures, or is exposed to significant dust/debris/road salt, the belts may require replacement prior to mileage specified in the maintenance interval section. Inspection of the Air Intake System Perform the following maintenance on the Air Intake System: 1. Inspect all the connections in the air system to make sure they are tight and leak-free. 2.
Check all hoses and ducting for punctures, deterioration, or other damage and replace, if necessary. Monitoring the Air Cleaner The engine is equipped with an engine-mounted air cleaner that is flat in design to accommodate various vehicle packages. Replace dry-type air cleaner elements when the maximum allowable air intake restriction has been reached. 1. Check the air cleaner restriction gauge (filter minder) daily. Refer to section “Air Cleaner Inspection” in the vehicle’s maintenance manual. 2. Check the gaskets for deterioration and replace, if necessary. 3. Inspect the entire air system daily for leaks daily.
Look especially for torn air inlet piping or boots, and loose or damaged clamps. Have worn or damaged parts repaired or replaced. Re-tighten loose connections. 84 All information subject to change without notice. Copyright © 2019 DETROIT DIESEL CORPORATION DDC-SVC-MAN-0209