ESS00015 IMPORTANT INFORMATION ESS00016 PREPARATION FOR REMOVAL AND DIS- ASSEMBLY 1. Remove all dirt, mud, dust, and foreign mate- rial before removal and disassembly. While cleaning, take care to protect the elec- trical parts, such as relays, switches, motor, resistors, controllers, etc., from high pres- sure water splashes. 2. Use proper tools and cleaning equipment. Refer to “SPECIAL TOOLS”. 3. When disassembling the machine, keep mated parts together. This includes gears, cylinders, pistons, and other parts that have been “mated” through normal wear. Mated parts must be reused or replaced as an as- sembly. 4.
During disassembly of the machine, clean all parts and place them in trays in the order of disassembly. This will speed up assembly time and help ensure that all parts are rein- stalled correctly. 5. Keep all parts away from any source of fire. 6. Be sure to keep to the tightening torque specifications. When tightening bolts, nuts, and screws, start with those that have larger diameters, and proceed from the inside to the outside in a crisscross pattern. 1-2 IMPORTANT INFORMATION GEN INFO