Yamaha Motor Co., Ltd. VK540E — Yamaha Motor Co., Ltd. VK540E User Manual

ESS00172 INSTALLATION NOTE: After installing all parts, refer to “CABLE ROUT- ING” in CHAPTER 8, to check the cable, lead and hose routings. 1. Pass the magneto leads 1 throught the hole, and install the grommet 2 to the crank- case. 2. Install: Stator assembly 3 NOTE: Align the timing mark ( ) 4 on the stator plate with the seam line 5 of the crankcase. 3. Install: Woodruff key 1 CDI magneto 2 NOTE: When installing the CDI magneto, make sure the woodruff key is properly seated in the key way of the crankshaft. Apply a light coating of lighium soap base grease to the tapered portion of the crankshaft end. CAUTION:

Be sure to remove any oil or grease from the tapered portion of the crankshaft using a cloth dampened with thinner. 4. Tighten: Nut 1 (CDI magneto) NOTE: Attach the universal rotor holder 2 to hold the CDI magneto. 5-22 CDI MAGNETO ENG Universal rotor holder: 90890-01235, YU-01235 Nut (CDI magneto): 85 Nm (8.5 mkg, 61 ftlb)