Yamaha Motor Co., Ltd. VK540E — Yamaha Motor Co., Ltd. VK540E User Manual

6. Check: Throttle valve movement Stick Replace carburetor body. ESS00202 ASSEMBLY NOTE: Before reassembling, wash all parts in clean gasoline. Always use new gaskets and O-rings. 1. Tighten: Inner parts Main nozzle: 3 Nm (0.3 m kg, 2.2 ft lb) Valve seat: 5 Nm (0.5 m kg, 3.6 ft lb) Main jet: 2 Nm (0.2 m kg, 1.4 ft lb) Pilot jet: 0.8 Nm (0.08 m kg, 0.58 ft lb) Starter plunger cap: 3.5 Nm (0.35 m kg, 2.53 ft lb) 2. Measure: Float height a Out of specification Adjust. 6-4 CARBURETOR CARB Float height a : 12  16 mm (0.47  0.63 in) Measurement and adjustment steps: Hold the carburetor upside down.

Incline the carburetor at 60  70 (so that the end of the float valve does not hang down as a result of float weight). Measure the distance between the carburetor body and top of the floats. NOTE: The float arm should resting on the needle valve without exerting pressure on it.