a b BULB(S) 1. Remove: Headlight bulb a Tail/brake light bulb b Meter light bulb c 2. Connect: Pocket tester (to the bulb terminals) WARNING Keep flammable products and your hands away from the bulb while it is on; it will be hot. Do not touch the bulb until it cools down. c 3. Check: Bulb(s) HEADLIGHT BEAM SWITCH 1. Disconnect: Headlight beam switch coupler 2. Connect: Pocket tester (to the headlight beam switch coupler) 3. Check: Headlight beam switch continuity Faulty Replace. LIGHTING COIL 1. Measure: Lighting coil resistance Out of specification Replace. Lighting coil resistance:
(Yellow – Black) 0.3 Ω ± 20% at 20 (68 F) 7-10 LIGHTING SYSTEM ELEC Terminal Continuity 1 – 2 Yes 1 – 3 Yes Switch position a Continuity b Continuity HI No Yes LO Yes No