Yamaha Motor Co., Ltd. VK540E — Yamaha Motor Co., Ltd. VK540E User Manual

COOLING FAN BELT TENSION ADJUST- MENT 1. Adjust: Fan belt deflection a Pushed at belt center by hand. Out of specification Adjust. Fan belt deflection a : 8 mm (0.31 in)/ 4 6 kg (8.8 13.2 lb) 2. Adjust: Fan belt deflection. Adjustment steps: Remove the recoil starter assembly, drive pulley and fan belt. Remove the driven pulley (outer half) 1 and shim(s) 2 . Adjust the drive belt tension by adding or re- moving a shim(s) 2 . NOTE: Install the removed shim(s) on the outside of the driven pulley. Do not dispose of the removed shim(s). Adding shim Belt tension decreases. Removing shim Belt tension increases. Tighten the driven pulley nut 1 . Install the fan belt 2 and drive pulley 3 .

2-9 COOLING FAN BELT TENSION ADJUSTMENT INSP ADJ Shim size Part number Thickness 90214-17017 0.5 mm (0.02 in) 90214-17018 1.0 mm (0.04 in) Driven pulley nut 1 : 43 Nm (4.3 mkg, 31 ftlb)