TER 5. 2-12 STARTER (CHOKE) CABLE FREEPLAY ADJUSTMENT/ INSP EXHAUST SYSTEM INSPECTION ADJ ESS00050 STARTER (CHOKE) CABLE FREEPLAY AD- JUSTMENT 1. Pull back the starter cable outer tube 1 . 2. Measure: Starter cable freeplay a Out of specification Adjust. Starter cable freeplay a : 0.5 1.5 mm (0.02 0.06 in) 3. Adjust: Starter cable freeplay Adjustment steps: Pull back the adjuster cover 1 . Loosen the locknut 2 . Turn the adjuster 3 in or out until the specified freeplay is obtained. Turning in Freeplay is increased. Turning out Freeplay is decreased. Tighten the locknut and push in the adjuster cover. ESS00053 EXHAUST SYSTEM INSPECTION 1. Remove:
Springs Refer to “EXHAUST ASSEMBLY” in CHAP- TER 5. 2. Inspect: Exhaust joint 1 Exhaust pipe 2 Exhaust silencer 3 Cracks/damgae Replace. Exhaust gaskets 4 Exhaust gas leaks Replace. 3. Check: Tightening torque Bolt (exhaust pipe joint): 30 Nm (3.0 mkg, 22 ftlb) 4. Install: Springs Refer to “EXHAUST ASSEMBLY” in CHAP- INSP ADJ Starter cable freeplay a : 0.5 1.5 mm (0.02 0.06 in) Bolt (exhaust pipe joint): 30 Nm (3.0 mkg, 22 ftlb)