2-16 INSP SHEAVE DISTANCE AND OFFSET ADJUSTMENT ADJ ESS00055 SHEAVE DISTANCE AND OFFSET ADJUST- MENT 1. Measure: Sheave distance a Use the sheave gauge. Out of specification Adjust. Sheave distance a : 267 270 mm (10.5 10.6 in) Sheave gauge: 90890-01702, YS-91047-3 2. Adjust: Sheave distance Adjustment steps: Loosen the engine mounting bolts. Adjust the position of the engine so that the sheave distance is within the specification. Tighten the engine mounting bolts. Mounting bolt (front) 1 : 103 Nm (10.3 mkg, 74 ftlb) Mounting bolt (front) (rear) 2 : 53 Nm (5.3 mkg, 38 ftlb) 3. Measure: Sheave offset b Use the sheave gauge. Out of specification Adjust. Sheave offset b :
14.5 17.5 mm (0.57 0.69 in) Sheave gauge: 90890-01702, YS-39506-5 4. Adjust: Sheave offset Adjustment steps: Apply the brake to lock the secondary sheave. Remove the bolt (secondary sheave) and sec- ondary sheave 1 . Adjust the sheave offset by adding or remov- ing shim(s) 2 . Adding shim Offset is increased. INSP ADJ Sheave distance a : 267 270 mm (10.5 10.6 in) Sheave gauge: 90890-01702, YS-91047-3 Sheave offset b : 14.5 17.5 mm (0.57 0.69 in) Sheave gauge: 90890-01702, YS-39506-5