Yamaha Motor Co., Ltd. VK540E — Yamaha Motor Co., Ltd. VK540E User Manual

ESS00062 BRAKE PAD INSPECTION 1. Apply the brake lever. 2. Inspect: Brake pad thickness a Out of specification Replace brake pad as a set. 1. Place the machine on a level surface. 2. Remove: Muffler 3. Place a rag under the checking hole 1 (oil level). 4. Remove: Filler cap 1 Checking screw 2 Gasket (checking screw) 5. Inspect: Oil level (drive chain housing) Oil flows out Oil level is correct. Oil does not flow out Oil level is low. Add oil until oil flows out. Recommended oil: Gear oil API GL-3 SAE #75 or #80 6. Inspect: Gasket (checking screw) Damage Replace. 2-19 BRAKE PAD INSPECTION/DRIVE CHAIN INSP ADJ Wear limit a :

10 mm (0.39 in) ESS00065 DRIVE CHAIN ESS00066 Oil level inspection WARNING The engine and muffler will be very hot after the engine has run. Avoid touching a hot en- gine and muffler while they are still hot with any part of your body or clothing during in- spection or repair.