. OPERATION MACHINE OPERATIONS AND CONTROLS REMARK dirty or it is difficult to see the inside, clean transparent cap (2) when replacing fuel has been removed during the cleaning operation, coat the O-ring with grease and 4. Check that nothing more comes out from drain hose (3), then remove drain valve (4). 3 - 114 I f pre-filte When t tighten until it contacts th Adjustment of Drain Valve I f drain val ve (4) is stiff, coa t the O-ring portion of the dr ain valve with grease to make t he movement smooth 1. Turn th e valve (6) at the bottom of the f uel tank to t he CLOSE positio 2. Set the container to catc h the fuel unde r the pre-filte r cartridge. 3.
Loose n drain valve (4), t hen drain all the water and s ediment in the tra cartrid nsparent cap (2) ge (1). and also the fuel accumulated in filter 5. Coat O -ring portion (7) with a suitable amount of gr ease. When doing this, be care ful not to let the grease get s tuck to the drain v alve water drain port (8) or drain valve threa d (9). 6. Tighte n drain valve (4) by hand until it contacts the bottom of 7. Remov e the fuel contai 8. Turn th e valve (6) at the bottom of the fuel tank to t he OPEN