Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Engine Oil Pan, Add Oil WARNING after the engine is stopped and may cause serious burns. Wait for the oil 3 - 117 emperature temperature to go down b efore performing this o 1. Open th e engine ho od. 2. Remov e dipstick (G ), and w ipe the oil o ff with a cloth. 3. Fully in sert dipstick (G) into filler pipe (F ), then remov 4. The oil level should be between the H a nd L marks on dipstick (G). If the oi l level is bel ow the L mark, add oil through oil f iller (F). 5.

If the oi l is above th e H line, open drain v alve (P) at the bottom of the e ngine oil pa n, drain the excess engine oil, then check n check the oil l evel again. 6. If oil lev el is correct, securel y tighten the oil filler cap a nd close the eng REMARK When chec king the oil le vel afte r the engine has been oper ated, wait for at least 15 minute s after stopping the e ngine before chec king. ine is at an angle, make it horizontal before checking. I f the mach ine is at an angle, m ake it horizo ntal before ch ecking.