. MAINTENANCE MAINTENANCE PROCEDURE EVERY 250 HOURS MAINTENANCE WARNING UPPER LEVEL line. If the 4 - 49 CHECK LEVEL OF BATTERY ELECTROLY Carry out this procedure before operating the ma Do not use th e battery if the batt ery electrolyte level is below the LOWER LEVEL line. This will accelera inside of the battery and reduce the service life of th e battery. In addition , it may cause an explosion. The battery g enerates flammabl e gas an d there is da nger of explosion, d o not bring fire or sparks near Battery electr olyte is dangerous . If it get s in your eye s or on your skin, w ash it off with a large amount doctor.
NOTICE When adding distilled water to the battery, do not allow the battery electrolyte to go above the UPP gh, it may leak and cause damage to the paint surface or corrode other parts. electrolyte level is too hi gh, it may leak and cause d amage to th e paint surface or co When adding distilled water in c old weather, add it b efore starting opera tions in the morning to preve freezing. Inspect the bat tery electrolyte l evel at l east once a month and follow the basic safety procedur Open cover (1 the machin are installed at When Checking Electrolyte Level from Side of Bat If it is possible to check the ele ctrolyte level from the side of the bat 1.
Use a wet cloth to clean the area around the electrolyte level lines and check that the electrolyte level is between the UPPER LEVEL (U.L.) and LOWER LEVEL (L.L.) lines. If the battery is wiped with a dry cloth, static electricity may cause a fire or explosion. . Use a wet cloth to clean th e area around the electrolyte check that the electrolyte level is betwee VEL (U.L.) and LOWER LEVEL (L .L.) lines. ry is wiped with