. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE REMARK (sodium or or there is no display of the UPPER REMARK with of or your battery maker. 4 - 50 the midwa ER LEVE cap (2) and ad After adding d d distilled water t istilled water, tigh o the U.L. ten cap (2 If distilled water is added to above t he UPPE R LEVEL (U.L use a syringe to lo wer the level to t he UPPE R LEVEL (U.L Neutralize the removed fluid with bak th a large bicarbonate), then flush it away wi consult your Kom atsu distributor or battery m When it is Impossible to Check Electrolyte Level from Side of Battery If it is impossible to check the elec trolyte lev el from the si as follows.
batter LEVEL line on the side of the batte ry, check Remove cap ( filler port (3) 2) at the top of the , and check the battery, lo electrol ok through the yte surface. electrolyte doe that the level r s not reach the sl eaches the bottom eeve (4), of the sle add distilled w eve (UPPER L line) without fa (A) Suitable level: Electrolyte level is u p to bottom of s so surfac surface to e tension causes elec bulge and poles appear (B) Low: El ectrolyte level is not up to les appear straig ht and not 2. After adding d istilled water, tigh ten cap (2 If water is added to above the bottom tip of the sleeve, use a to remove electro sodium bicarbona lyte.
Neutralize te, then flush it the remo away with When it is Possible to Use Indicator to Check Electrolyte Le If it is possible to use an indicator to check th e electrolyte l evel, follow the instructions given.