. MAINTENANCE MAINTENANCE PROCEDURE CHECK OIL LEVEL IN SWING MACHINERY CASE, ADD OIL WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil 1. Remove dipstick (G) and wipe the oil from the dipstick with a cloth. draining the oil. the hole and install oil filler (F) cap. 4 - 64 temperature to go d own before performing t his operation. 2. Fully insert di pstick (G) into the filler 3. Pull out dipsti ck (G) and check that t he oil level i s between the arks on the dipstick. 4. If the oil does not reach the (L) mar filler port (F) and add tick (G) when adding o 5.
If the oil leve l is above the (H) ma ) and drain the excess ainer to catch the oil un der drain va lve (B) before 6. After checkin g oil level or adding oil, insert the di pstick (G) into