Komatsu — LOCATIONS

. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT Lock Pin (rear is locked) full position NOTICE NOTICE Always install an additional filter in the return circuit on machines equipped with a hydraulic breaker. 6 - 6 This pin (4) locks t Position (a): Locke Position (b): Only f ront of pedal can be operated to full position Position (c): Both f ront and rear of ped al can be op erated t When not using the attachment, set the lock pin to position (a).

When using the breaker, use the wo rking mode selector switch on the monitor s witch portion to set th e working m ode to B mode, and set the lock pin to position (b) w hen using th e pedal When using the crusher, use the wo rking mode selector switch on the monitor switch portion to set the working mode to A TT mode, and set t he lock pin to positio n (c) when u sing the pedal. When using the b reaker, if the lock pin is set to positio n (c) and the pedal is operated in dire ction (D), it will caus e damage o defective operatio n of the breaker.

To p revent this, wh en using the breaker, always set the lock pin to position ( Before changing t he position of the lock pin, stop the Breaker Circuit Additional Oil Filter This filter (5) preve nts deterioration of t he hydraulic oil whe n using a b reaker. n B mode is selected on the monitor. Oil only flows whe n B mode is selecte d on the mon