. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT (a) FREE: Hydraulic oil flows (direction of arrow is parallel to long direction of arm) (b) LOCK: Hydraulic oil arrow is at 6 - 9 Hydraulic Circuit Conn When co nnecting the atta chment, connect t he hydraul ic circuit as follows. 1. Chec k that stop valve (1) is at LOCK po sition il does not flow ( s to long direction directi of arm When setting the FREE or LOCK position of the stop valve rotor, remov e bolt (2), turn o ver plate (1), the n turn the rotor. After . otor. After setting , install plate (1) again with bolt (2) 2. Remove e tip of the stop valve piping. (Left and or damage the removed parts. iping .
(Lef t and right, Be ca reful not to lose or damage the re moved part 3. After removing plug ( 3), connect the at tachment piping (4) is er. (4) is provided by the attach ment manufactur For th e mouthpiece siz e and accumulato r add-on, t he action to take differs accordin g to the attachm ent manufacturer, so . so pleas e consult your K omatsu distributor