. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT hydraulic tank to (a). (a) FREE: Hydraulic oil flows (direction of arrow is parallel to long direction of arm) arrow is at 6 - 18 7. eliminat e the internal pressure in the hydrau 8. After checking that th e hydraulic oil tempera ture has gone down, remove the plugs from 2 places at the outlet port and inlet port. B e careful not to get any dirt or mud on the If t he O-ring is dama ged, replace it with a n 9. Connect the hose at the attachment side. Whe n doing this, che ck the direction of flow of the oil and b e careful not to make any mi 10.
Set t he r otor of the st op valve installed to th e inlet port on the side (b) LOCK: Hydraulic s to long direction of a When setting the F REE or LOCK position of the stop valve rotor, remove bolt ( 2), turn over plate (1), t hen turn the rotor. After setting, instal l plate (1) again with b 11. After installing the att achment, check the oil level in the hydraulic