Komatsu — Switches

Explanation of components OPERATION Switches engine has been started. The key will return to the ON position when released. Speed range selector switch 0. Use this switch (2) to switch the speed range. Use 1st and 2nd for operations, and 3rd and 4th for travel. Position (a): 1st Position (b): 2nd Position (c): 3rd Position (d): 4th Variable shift control switch 0. When the speed range is in 1st, it is possible to use this dial (3) to set the maximum speed as desired. Turn the dial to the right to increase the setting; turn it to the left to decrease the setting. The conditions for use may differ according to the condition of the road surface. Directional selector switch 0.

This switch (4) is used to switch the direction of travel of the machine between forward and reverse. F Position: FORWARD N Position: Neutral R Position: REVERSE Before operating this switch, check that the condition is as fol- lows: Directional lever is at N. Directional selector switch actuation switch is at ON. If the condition is not as above, the switch will not work. For details, see “Changing direction on page 3-71“. Directional selector switch actuation switch 0. When this switch (5) is turned on, the directional selector switch is actuated. Position (a): ON The directional selector switch is actuated. Position (b): OFF The directional selector switch is turned off.

REMARK Turn this switch ON when the directional lever and directional selector switch are at the neutral position. At any other position, this switch does not work. Even if the directional selector switch is functioning, when the directional lever is operated, the operation of the directional lever is given priority. 3-30 Installed tire Max. speed [km/h (MPH)] Standard tire (20.2-25) 4.0 - 13.0 (2.5 - 8.1) Small diameter tire (17.5-25) 3.6 - 11.7 (2.2 - 7.3)