Explanation of components OPERATION Switches Turn signal lever 0. This switch (7) is used to operate the turn signal lamp. (a) position : LEFT TURN (Push lever FORWARD.) (b) position : OFF (c) position : RIGHT TURN (Pull lever BACK.) REMARK When the lever is operated, the pilot lamp turn signal pilot lamp also flashes. When the steering wheel is turned back, the lever auto- matically returns to its original position. If it does not return, return it manually. Dimmer switch 0. This switch (7) is used to switch the head lamps between high beam and low beam. Position (a): Low beam Position (b): High beam Horn button 0.
When the horn button (8) in the center of the steering wheel is pressed, the horn will sound. Hazard lamp switch 0. Use the hazard lamp only in emergencies. Using the hazard lamp when traveling may cause confusion for other machine operators. This switch (9) is used in emergencies, such as when the machine breaks down and has to be parked on the road. Position (a): Direction indicator lamp and directional indicator pilot lamp flash, and pilot lamp (A) lights up at the same time. Position (b): Lamps go out 3-32 WARNING