OPERATION Explanation of components Control levers, pedals Control levers, pedals 0. DIRECTIONAL LEVER 0. This lever (1) is used to switch the direction of travel of the machine between forward and reverse. When starting the engine, if the directional lever is not at the N position, the engine will not start. Position (a): FORWARD Position N: NEUTRAL Position (b): REVERSE REMARK When the starting switch is turned to the ON position, if the directional lever is not at the N position, the central warning lamp lights up and the alarm buzzer sounds inter- mittently. When the directional lever is set to the N position, the cen- tral warning lamp goes out and the alarm buzzer stops.
3-37 (1) Directional lever (4) Brake pedal (2) Safety lock lever (for work equipment lever) (5) Accelerator pedal (3) Work equipment lever (7) Parking brake lever