Kubota — B Checking Fuel Injection Nozzle (Injection Pressure)

93 PERIODIC SERVICE A Do not operate the tractor immediately after changing the transmission fluid. Run the engine at medium speed for a few minutes to prevent damage to the transmission. B Changing Front Axle Gear Case Oil 1. To drain the used oil, remove the right and left drain plugs and filling plugs at the front axle gear case and drain the oil completely into the oil pan. 2. After draining reinstall the drain plugs. 3. Fill with the new oil up to the filling plug port. (See "LUBRICANTS, FUEL AND COOLANT" in "MAINTENANCE" section.) 4. After filling reinstall the filling plugs. B Changing Front Differential Case Oil 1.

To drain the used oil, remove the drain and filling plug at the front differential case and drain the oil completely into the oil pan. 2. After draining reinstall the drain plug. 3. Remove the oil level check plug. 4. Fill with the new oil up to the lower rim of check plug port. (See "LUBRICANTS, FUEL AND COOLANT" in "MAINTENANCE" section.) 5. After filling reinstall the filling plug and check plug. (1) Drain plug (2) Filling plug B Adjusting Engine Valve Clearance Consult your local KUBOTA Dealer for this service. (1) Drain plug (2) Filling plug (3) Check plug EVERY 1 000 HOURS or 1 YEAR Be sure to do the following servicing once every 1 000 hours or yearly, whichever comes first.

B Replacing Air Cleaner Primary Element and Secondary Element (See "Cleaning Air Cleaner Primary Element" in "EVERY 100 HOURS" in "PERIODIC SERVICE" section.) EVERY 1 500 HOURS B Checking Fuel Injection Nozzle (Injection Pressure) Consult your local KUBOTA Dealer for this service. Oil capacity 3.5 L for each side Oil capacity 7 L