23 OPERATING THE TRACTOR 6. Selecting the Travel Speed. (1) Hydraulic - shuttle shift lever (2) Main gear shift lever (3) Range gear shift lever (4) Pilot lamp (LOW) (5) Pilot lamp (HIGH) (6) Creep lever (if equipped) (F) "FORWARD" (N) "NEUTRAL POSITION" (R) "REVERSE" "LOW" "HIGH" (A) "PUSH" By combination of using the shift lever and the shift switch, forward speeds and reverse speeds shown in the table below are obtained. B Main Gear Shift Lever To avoid personal injury or death: A Before moving the main gear shift lever (1 2 3 4), make sure the pilot lamp is on. If the pilot lamp fails to come on, stop the tractor completely and start the gear shifting all over.
A Do not shift between and on a downhill way. The shifting may fail. Be sure to do the shifting before going downhill. 1. 8 speeds can be selected by the main gear shift lever. 2. The main gear shift is fully synchronized to shift without stopping. Without creep 16 forward speeds 16 reverse speeds With creep 24 forward speeds 24 reverse speeds