Kubota — B Hydraulic Control Unit Use Reference Chart

49 HYDRAULIC UNIT B Hydraulic Control Unit Use Reference Chart In order to handle the hydraulics properly, the operator must be familiar with the following. Though this information may not be applicable to all types of implements and soil conditions, it is useful for general conditions.

Implement Soil condition (1) Position control lever (2) Draft control lever Gauge wheel (1) Telescopic stabilizers Remarks Top link mounting holes Moldboard plow Light soil Medium soil Heavy soil 3 2 or 3 2 Draft and Mixed control (Place the draft control lever to the suitable position and set the implement pull with the position control lever.) YES/NO Loose Insert the set-pin through the slot on the outer tube that align with one of the holes on the inner bar. For implements with gauge wheels, lower the position control lever all way. Disc plow --- 2 or 3 Harrower (spike, springtooth, disc type) --- 2 Sub-soiler............... Weeder, ridger........

--- 1 Position control (Hold the draft control lever at the front most position during operation.) YES Tighten Telescopic stabilizer should be tight enough to prevent excessive implement movement when implement is in raised position. For implements with gauge wheels, lower the position control lever all way. Earthmover, digger, scraper, manure fork, rear carrier...... YES/NO Mower (mid- and rear-mount type) Hayrake, tedder...... NO