SYSTEM / ECM System Overheat Indicator Control Purpose: To light the overheat indicator on monitor unit in order to inform the abnormal rising in the engine coolant temperature to the operator. Operation: 1. When the engine coolant temperature exceeds the normal value, ECM excites the overheat relay. Therefore, terminal 1-7 of the monitor unit is grounded. 2. When terminal 1-7 of the monitor unit is grounded, the monitor unit lights the overheat indicator. 3. When the engine coolant temperature returns to the normal value, ECM demagnetizes the overheat relay. Therefore, terminal 1-7 of the monitor unit is disconnected from the ground. 4.
When terminal 1-7 of the monitor unit is disconnected from the ground, the monitor unit turns off the overheat indicator. NOTE: The monitor unit lights the stop indicator as well as the overheat indicator. From Fuse #9 of Fuse Box B Overheat Relay Diode G Monitor Unit ECM Overheat Indicator 1-7 49 Stop Indicator T4GD-02-02-005 T2-2-6