SYSTEM / ECM System Engine Oil Low Pressure Indicator Control Purpose: To light the engine oil pressure indicator on monitor unit in order to inform the pressure lowering in engine lubricant oil to the operator. Operation: 1. When the engine lubricant oil pressure becomes lower than the normal range, ECM excites the engine oil pressure relay. Therefore, terminal 1-8 of the monitor unit is grounded. 2. When terminal 1-8 of the monitor unit is grounded, the monitor unit lights the engine oil pressure indicator. 3. When the engine lubricant oil pressure returns to the normal range, ECM demagnetizes the engine oil pressure relay.
Therefore, terminal 1-8 of the monitor unit is disconnected form the engine. 4. When terminal 1-8 of the monitor unit is disconnected form the engine, the monitor unit turns off the engine oil low pressure indicator. NOTE: The monitor unit lights the stop indicator as well as the engine oil pressure indicator. ECM Monitor Unit Engine Oil Pressure Relay Diode H Engine Oil Low Pressure Indicator 1-8 48 Stop Indicator T4GD-02-02-006 T2-2-7 From Fuse #9 of Fuse Box B