COMPONENT OPERATION / Drive Unit Clutch Connection from Neutral (Clutch Pressure Increase) During Clutch Connection (Refer to Oil Pressure Waveform A on T3-9-32.) When the transmission is shifted by the lever, the electric signal is transmitted from the controller to proportional solenoid valve (1). During oil pressure waveform A, pressure oil to oil passage (a) of proportional solenoid valve (1) is regulated to the pressure corresponding to the electric signal of the controller, and is supplied to oil passage (c). 1.
Pressure oil to oil passage (c) is supplied to pressure chamber (e) of modulation spool (2), overcomes the force of modulation spring (3), and moves modulation spool (2) leftward. Therefore, pressure oil is supplied from oil passage (b) to oil passage (d) of the clutch piston, and the clutch pressure increases. 2. In addition, pressure oil to oil passage (d) passes back chamber (f) of modulation spool (2), and is supplied to back chamber (g) of modulation spool (2). As modulation spring (3) is installed in back chamber (g) of modulation spool (2), it overcomes the oil pressure in oil passage (d), moves modulation spool (2) rightward and closes oil passage (d) temporarily.
Electric current from the controller is enlarged gradually, and steps 1 and 2are repeated. Therefore, the clutch oil pressure gradually increases. f To Clutch Piston g 3 1 c a b e 2 T4GD-03-09-014 1 - Proportional Solenoid Valve 2 - Modulation Spool 3 - Modulation Spring d T3-9-34