hitachi — Differential

COMPONENT OPERATION / Axle In Steering When the vehicle body is turned, uneven resistances are applied to the drive wheels. Therefore, due to the difference of the resistances applied to the inner and outer wheels, differential pinion gears (1, 4) start re- volving on side gears (2, 3), while rotating round the pinion shaft. Consequently, in case the resistance force applied to shaft (7) is large, pinion gears (1, 4) rotate in the same direction as the rotational direction on side gear (2) of shaft (7). The speed of shaft (7) is lowered, the amount of the speed reduction is applied to shaft (8) and the differential function is performed.

Suppose ring gear (9) is driven by drive pinion (10) at the speed of 100. In the condition of the vehicle body traveling straight, the drive wheels on the both sides rotate at the same speed. However, in case the vehicle body is turned and the speed of the right drive wheel is lowered to 90, the left wheel turns at the speed of 100 + (100 90) = 110 as the speed of 10(100 90 = 10) is added to the speed of the left wheel. If ring gear (9) rotates at the speed of 100, the sum- mation of the speeds of the left and right wheels be- comes always 200 regardless of movement of the re- spective wheels. 9 10 1 8 3 7 2 6 4 T487-03-06-014 T3-10-5