DOOSAN ŠKODA POWER — DOOSAN ŠKODA POWER Steam Turbine Assembly Manual

Instructions for ST assembly 210 MW Bandel India Document number: S12003-YK09-05MAA-747002 Tylova 57l 31600 Plzeň l Českб Republika · Check the top clearance 0,510 0,633 mm, check the side clearances 0,540 0,592 mm. · Set the clearance between bearing shell and bearing stand - in free state must be set 0,02 0,04 mm, the clearance setting is done by grinding of the washers pos.16. · The side and altitude position of bearing can be changed by means of the wedge- supports pos.4,5 · Kontrolujte vůli svršku 0, 510 0,633 mm, kontrolujte stranovou vůli 0, 540 0,592 mm.

· Nastavte vůli mezi ložiskovou pбnvн a ložiskovэm stojanem ve volnйm stavu musн bэt 0,02 – 0,04 mm, nastav enн vůle se provбdн broušenнm podložek pos.16. · Ložisko je stranově a vэškově stavitelnй na klнnovэch podložkбch poz. 4,5.. Radial bearings D430 Radiбlnн ložisko D 430 Weight / Hmotnost: 793 kg Drawing no./ Vэkres č. Tp6071933 · Check the top clearance 0,550 0,673 mm, check the side clearances 0,590 0,641 mm. · Set the clearance between bearing shell and bearing stand - in free state must be set 0,02 0,04 mm, the clearance setting is done by grinding of the washers pos.16.

· The side and altitude position of bearing can be changed by means of the wedge- supports pos.4,5 · Kontrolujte vůli svršku 0, 550 0,673 mm, kontrolujte stranovou vůli 0, 590 0,641 mm. · Nastavte vůli mezi ložiskovou pбnvн a ložiskovэm stojanem ve volnйm stavu musн bэt 0,02 – 0,04 mm, nastavenн vůle se provбdн broušenнm podložek pos.16. · Ložisko je stranově a vэškově stavitelnй na klнnovэch podložkбch poz. 4,5.. Date: 12.11.2013 Page 193 / 278 Prepared: O.Baroch Last Revision: Approved: P.Lešetickэ