DOOSAN ŠKODA POWER — DOOSAN ŠKODA POWER Steam Turbine Assembly Manual

Instructions for ST assembly 210 MW Bandel India Document number: S12003-YK09-05MAA-747002 Tylova 57l 31600 Plzeň l Českб Republika Radial bearings D450 Radiбlnн ložisko D 450 Weight / Hmotnost: 1048 kg Drawing no. / Vэkres č. Tp6069752 · Check the top clearance 0,580 0,703 mm, check the side clearances 0,615 0,667 mm. · Set the clearance between bearing shell and bearing stand - in free state must be set 0,02 0,04 mm, the clearance setting is done by grinding of the washers pos.16. · The side and altitude position of bearing can be changed by means of the wedge- supports pos.4,5.. · Kontrolujte vůli svršku 0, 580 0,703 mm, kontrolujte stranovou vůli 0, 615 0,667 mm.

· Nastavte vůli mezi ložiskovou pбnvн a ložiskovэm stojanem ve volnйm stavu musн bэt 0,02 – 0,04 mm, nastavenн vůle se provбdн broušenнm podložek pos.16. · Ložisko je stranově a vэškově stavitelnй na klнnovэch podložkбch poz. 4,5.. Combined bearing Kombinovanй ložisko Weight / Hmotnost: 1478 kg Drawing no. / Vэkres č. Tp6077443 · Check the proper contact of the thrust bearing segments to rotor collar (both sides of thrust bearing), perform the blue paint · Kontrolujte nalнcovбnн axiбlnнho ložiska, tj. kontakt kamenů axiбlnнho ložiska s nбkružky rotoru (obě strany ložiska), proveďte kontrolu Date: 12.11.2013 Page 194 / 278 Prepared: O.Baroch Last Revision: Approved: P.Lešetickэ