Instructions for ST assembly 210 MW Bandel India Document number: S12003-YK09-05MAA-747002 Tylova 57l 31600 Plzeň l Českб Republika instructions of actually delivered sensors (Woodward and Philips). Connecting of sensors into junction box or into switchgear of the speed measurement and over-speed protection will be done by I&C electrician. Zapojenн všech čidel do sdružovacн skřнně nebo do rozvaděče měřenн otбček a přeotбčkovэch ochran provede elektrikбř SKŘ. Rotors grounding Install the set of components for rotor grounding according to drawing Tp6077188 . Attach the holder of earthing belts REDIGO to the coupling cover (drill holes and tap the thread M10).
The cable of earthing system is outleted through the shell of the front bearing stand by means of bushing. For sealing of bushing with the shell use the sealing rings and use also the suitable sealing compound with sufficient Uz emněnн rotorů Soupravu dнlů pro uzemněnн rotorů montujte dle vэkresu Tp6077188 . Držбк zemnнcнch pбsků REDIGO je nutno při pevnit ke krytu spojky ( vrtejte dнry a vyřнzněte zбvit M10). Kabel zemnнcнho ъstrojн je vyveden skrze stěny přednнho ložiskovйho stojanu pomocн průchodky . Pro utěsněnн průchodky použijte kromě těsnнcнch kroužků t акй vhodnэ tmel s dostatečnou teplotnн odolnostн. Tmel nesmн ovlivnit vlastnosti mazacнho Date: 12.11.2013 Page 200 / 278 Prepared:
O.Baroch Last Revision: Approved: P.Lešetickэ