Instructions for ST assembly 210 MW Bandel India Document number: S12003-YK09-05MAA-747002 Tylova 57l 31600 Plzeň l Českб Republika compound Molykote G Rapid+ in the thread of screws and on the faces of nuts. On the connecting flange of the cross-over piping there is 48 pcs of bolts M45x3 pos.5 and 96 pcs of opened nuts pos.6 (in drawing Tp6076111 ) with hexagonal 70 mm , which have to be tighten with torque of 1050 N.m. · Carry out the welding and assembly of this piping according to the instruction of the assembly documentation of piping supplier. protizбděrovou pastu Molykote G Rapid+ .
Na přнrubě spojujнcн dнly převбděcнho potrubн je 48 ks šroubů M45x3 pos.5 a 96 ks matic poz.6 (na vэkrese Tp6076111 ) se 6HR70mm , kterй je tř eba utahovat krouticнm momentem 1050 N.m . · Svařovбnн a montбž provбdějte dle instrukcн v montбžnн dokumentaci dodavatele tohoto potrubн . Date: 12.11.2013 Page 234 / 278 Prepared: O.Baroch Last Revision: Approved: P.Lešetickэ