Deutz — Renewing the crankshaft sealing ring (flywheel side)

D 2011 Drive system TD 2011 W 02-02-02 ●Pull out the crankshaft sealing ring with assembly le - ver. ●Visually inspect the crankshaft sealing ring running surface. 6 © 47085-0 Installing the crankshaft sealing ring ●Mount guide sleeve (1). ●Tighten screws (2). 1 The bores in the guide sleeve must match the threaded holes in the crankshaft flange. 2 © 47088-1 ●Place the crankshaft sealing ring carefully on the pe - ripheral surface. Do not oil waxed crankshaft sealing rings. The sealing lip faces the crankcase. © 47089-0 © 01/2009 OBJ_DOKU-23469-001.fm 2/4