D 2011 Drive system TD 2011 W 02-02-02 ●Mount assembly sleeve (1). ●Press on the crankshaft sealing ring to the stop. ●Plug in the bearing (2). ●Screw on nut (3). 2 1 3 6 © 47090-1 ●Tighten nut to the stop of the assembly sleeve (1). The installation depth is determined by the assembly tool. ●Remove assembly tool. ●Install flywheel. 1 W 12-06-01 © 47091-0 © 01/2009 OBJ_DOKU-23469-001.fm 3/4